Component/RGB Splitters

Comprehensive
1x2 Component Video Ditribution Amplifier Item #: CDA-CV20 - The CDA-CV20 is a high performance distribution amplifier for component Video (RGB/YUV) signals. It will take one input, provides correct buffering and isolation and distributes the signal to 2 identical outputs. Uses RCA connectors for the inputs an
[more info...]

Kramer Electronics
1x2 Multi Format Video Distribution Amplifier with Stereo Audio Item #: VM-312 - The VM-312 is a multi-format video distribution amplifier for composite, S-Video (Y/C), and component (HDTV) signals with one audio input for an unbalanced stereo audio signal. It takes one input of each video format and one audio input on a 3.5mm mi
[more info...]

Kramer Electronics
1x2 RGBS/Component Video Distribution Amplifier Item #: VM-1042 - The VM-1042 is a high performance distribution amplifier for RGBS or component video signals. The unit has 4 channels of single BNC inputs each with 2 outputs, making it possible to configure it as four 1x2 composite video, two 1x2 S-Video (Y/C) or o
[more info...]

Gefen
1x3 Component Distribution Amplifier with Audio Item #: EXT-COMPAUD-143 - The EXT-COMPAUD-143 is a 1:3 Component Audio Distribution Amplifier is the perfect solution for anyone who needs to send one source of high definition component video and analog or digital audio to multiple displays at the same time. It supports all
[more info...]

Kramer Electronics
1x3 Component Video, S/PDIF & Stereo Audio Distribution Amplifier Item #: VM-30CA - 1x3 RGBHV Distribution Amplifier on BNC's.
[more info...]

Kramer Electronics
1x3 RGBHV Distribution Amplifier on 15-pin. Item #: VP-123V - The Kramer VP-123 and VP-123V are high performance 1:3 distribution amplifiers for graphics and comp...
[more info...]

Kramer Electronics
1x3 RGBHV Distribution Amplifier on BNC's Item #: VP-123 - The Kramer VP-123 and VP-123V are high performance 1:3 distribution amplifiers for graphics and component video signals. Both machines use 5 BNC connectors for each output. The VP-123 uses 5 BNC connectors for the inputs, while the VP-123V uses a "VG
[more info...]

Kramer Electronics
1x5 Component Video, S/PDIF & Stereo Audio Distribution Amplifier Item #: VM-50CA - The VM-50CA is a high performance distribution amplifier for component video (YUV), S/PDIF and unbalanced stereo audio signals. It takes one input of each signal type, provides correct buffering and isolation, and distributes the signal to five ident
[more info...]

Kramer Electronics
1x5 Component Video Distribution Amplifier Item #: VM-1045 - The VM-1045 is a high performance distribution amplifier for component video signals. It can be configured as a four 1x5 composite video, two 1x5 S-Video (Y/C) or one 1x5 component (RGB/S) distribution amplifier.
[more info...]

Kramer Electronics
1x5 RGBHV & Component Distribution Amplifier Item #: VM-1055 - The Kramer VM-1055 is a high performance 1:5 distribution amplifier for component video signals using BNC connectors. The VM-1055 has five separate channels, each of which is a high bandwidth 1:5 DA. In its typical application, it is designed to acce
[more info...]

Kramer Electronics
1:10 Component Video on RCA's. Item #: VM-100C - The VM-100C is a high quality 1:10 distribution amplifier for component video signals. It accepts one input and distributes the signal to 10 identical outputs using RCA connectors. The looping connectors can be used to connect to a local monitor or o
[more info...]

Kramer Electronics
1:10 Component Video on BNC's. Item #: VM-100CB - The Kramer VM-100CB is a high quality 1x10 distributor for component video signals (HDTV compatible). It accepts one input and distributes the signal to 10 identical outputs using BNC connectors. With a video bandwidth of 450MHz, transparent operatio
[more info...]

Kramer Electronics
1:10 Component Video, SPDIF, and stereo audio on RCA's. Item #: VM-100CA - The VM-100CA is a distribution amplifier for component video signals ( HDTV compatible), along with analog and digital audio signals. It takes one input of each signal type, provides correct buffering and isolation and distributes the signal to 10 id
[more info...]

Kramer Electronics
1x10 RGBHV or Composite Video DA with Level and EQ Item #: VP-10 - The Kramer VP-10, VP-15 and VP-18 are three distribution amplifiers (1:10, 1:15, 1:18) for video, component video and graphics signals (RGBHV) of the highest quality. Each machine can function as a single 1:10/15/18 RGBHV distribution amplifier or as
[more info...]

Kramer Electronics
1x15 RGBHV or Composite Video DA with Level and EQ Item #: VP-15 - The Kramer VP-10, VP-15 and VP-18 are three distribution amplifiers (1:10, 1:15, 1:18) for video, component video and graphics signals (RGBHV) of the highest quality. Each machine can function as a single 1:10/15/18 RGBHV distribution amplifier or as
[more info...]

Kramer Electronics
1x18 RGBHV or Composite Video DA with Level and EQ Item #: VP-18 - The Kramer VP-10, VP-15 and VP-18 are three distribution amplifiers (1:10, 1:15, 1:18) for video, component video and graphics signals (RGBHV) of the highest quality. Each machine can function as a single 1:10/15/18 RGBHV distribution amplifier or as
[more info...]