Our DVI Audio Extender extends your DVI and digital/analog audio up to 150 feet away from your HDTV DVI or HDMI source using cost effective CAT-5 cables. The DVI Audio Extender sender unit sits next to your video source such as computer, DVD player or any set-top box. The cables supplied with the DVI Audio Extender connect your video source/audio source to the sender. Your display/audio receiver plugs into the back of the DVI Audio Extender receiver. Two CAT-5 cables* connect the sender and the receiver units to each other. The DVI Audio Extender is HDCP compliant.
Features
• Extends any DVI & Digital or Analog Audio compliant device up to 200 feet from the computer
• Uses CAT-5e cable for DDC and control signals
• Supports Digital 8.1(DTS, Dolby Digital, etc.)
• Audio and video are transmitted digitally over the CAT-5e cable for zero signal loss
• Supports resolutions up to 1080p, 2K, and 1920 x 1200
• Supports DDWG standard for DVI compliant monitors
• HDCP compliant
Data Transmission Rate: 12.8 Mb/s
Digital Audio Input/Output: S/PDIF (Digital Coax), Optical TOSlink
Analog Audio Input/Output: RCA Left and Right
S/PDIF (Digital Coax): 96 kHz Performance
Video Amplifier Bandwidth: 165 MHz
Single Link Range:1080P/1920 x 1200
Input Video Signal:1.2 volts p-p
Input DDC Signal: 5 volts p-p (TTL)
Input/Output DVI Connector: DVI-I (29 pin) female, Supports ONLY Digital Signals
Link Connector: RJ-45
Power Supply: (2) 5Vdc Power Supplies / 10W each Power consumption (Max)
Dimensions: 3.3"D x 5.5"W x 1"H
Shipping Weight: 4 Lbs.
Download